Emco Concept Turn 55 CNC Lathe w Computer (Compact 5 CNC) 0401
Description: A fully working Emco Concept Turn 55 CNC Lathe with Windows based computer system with Emco CNC software loaded.
Note: The Emco Concept Turn 55 CNC Lathe is the updated version (ca 2008) of the original Emco Compact 5 CNC lathe and the Emco PCTurn 50 and PCTurn 55 CNC lathes. It has an identical Emco DIN head stock with MT2 taper, lathe bed, cross slide table and MT1 taper tail stock and uses the same tooling. It uses a RJ45 network adapter for communication between the CNC lathe and the Windows based computer. Includes key for Control Box On Off switch.
Condition: Excellent working condition as demonstrated to me when picked up April 2017. Good cosmetic condition. Dirty. Needs a cleaning. Iron ways in very good condition. Some tool marks. From the Fanuc keyboard I can jog the X and Z axis AND turn the spindle ON and OFF with rotation at 300 rpm. The Emco CNC software makes the spindle turn at high RPM's but I don't care to learn to operate Emco CNC software. Overall good appearance; paint is chipped, scratched, stained and faded in spots. Some oil and oxidation stains as can be expected from age. Spindle nose mount Rohm 3 jaw chuck with back plate in fair condition with brand new ready to grind Rohm jaws. Chuck uses standard 6mm hex key to tighten jaws. These new jaws must be ground before using this chuck. You may want to purchase another Compact 5 / PCTurn 50 & 55 type lathe chuck on eBay. Nice matching tail stock with locking levers.
Payment: We only accept Checkout with Paypal.
Freight: Approx. 54" x 36" wood pallet standing, height is about 24" weight approx. 350 lbs. maximum. Freight category 100.
Shipping: Heavy item. Charges will be a flat rate shipped anywhere in the Continental US Only; No where else. Shipment by truck will most likely originate from Romulus, MI 48174 If shipping is not billed with Paypal checkout, vendor will send separate bill for shipping.