Emco PCMill 50 CNC Mill w Computer & DOS Software H30S
Description: Here is a nice low usage Emco PCMill 50 CNC mill with Emco Controls installed on a Gateway Tower PC from a school system. It has Emco installed NEMA 23 stepper motors and motor mounts on all three axis with ballscrew mounted MXL timing gears and dove tail iron ways. The lever actuated spindle is BT30 so tooling is widely. No question about it; this is a great unit.
Note: The Emco PCMill 50 CNC Mill is the updated version of the original Emco F1 CNC mill. It has an identical Emco Quick Change Tool Holder Headstock with BT30 taper and XYZ milling iron axis's and uses the same tooling. It uses a DB9 cable for communication between the CNC mill and the DOS based computer. Includes key for Control Box On Off switch.
Condition: The unit came from a school and was used for teaching. The mill from what I can see has had very limited use. The working condition is very good or better. The milling table is in excellent original condition. The steppers jog nicely using the software. That's all I can show you. I saw the spindle motor in operation while running a program when I picked up the CNC mill but I don't know how to activate it with the software. Beyond what little I can demo of the software, I have no real experience running Emco supplied CNC software or writing programs for this CNC mill. There is a metal panel that was removed from the rear of the machine. I do not have this panel. It appears to be of little consequence.
Payment: We only accept Checkout with Paypal.
Shipping: Buyer arranged pickup or Buyer arranged shipping ONLY Everything you need to get a freight quote is listed as follows:
Shipping Specifications: If you are going to have the item picked up by truck, plan on a single pallet no larger than 60" x 42" standing 36" high, approx. weight about 450 lbs. Freight category 100.
PICKUP LOCATION: is near Ann Arbor, MI 48103. Liftgate required. Contact seller for details after purchase.