Techno Isel DaVinci CNC Router Drilling Mill #3
Description: Here is a working Techno-Isel Stepper DaVinci CNC mill. Heavy duty ball screws on this high quality aluminum mill. Travel Approximation: X Axis: 8.25", Y Axis: 9.00" and Z Axis: 4.50" An easy retrofit if you want to add your own controls. Make sure you get NEMA 23 motors. It includes 4 T-nuts with socket head cap screws and 115 VAC plug in power cable.
Note: There are 2 positioning pins for positioning something. They are easily removed.
Also - An easy retrofit if you want to add your own controls. Make sure you get NEMA 23 motors.
Excluded items: My blue Lift table and other stuff in my garage. No DB9 serial interface cable and no software.
Travel: Travel: X Axis: 8.25", Y Axis: 9.00" and Z Axis: 4.50"
Condition: This CNC mill came from a Technical School. It's in very good condition. Self test works nicely for all 3 axis. There is some gummy label stuff on the mill that should clean off with thinner. There is some oil and oxidationstains on the bare metal surfaces as can be expected from age.
PALLET: (Mill/Drill) - 40" x 42" wood pallet standing, height is about 30", weight approx. 225 lbs. maximum. Freight category 100.